Axle Bushing (Front) Explanation

FRONT AXLE BUSHINGS REMOVAL
1. Remove the upper suspension arm from axle. Refer to ARM, UPPER CONTROL, REMOVAL
2. Install the special tool (special tool #9948-3, Nut, Special) Nut (Fig 1) #1, (special tool #9948-1, Receiver) Receiver #2 and (special tool #9948-2, Remover, Bushing) Driver #4.
3. Press the bushing out of the axle housing.

FRONT AXLE BUSHINGS INSTALLATION
1. Place special tool (special tool #9948-3, Nut, Special) Nut (Fig 1) #1, (special tool #9948-4, Installer, Bushing) Driver #2, (special tool #9948-1, Receiver) Receiver #5 and the press the bushing #3 in the axle housing #4.
2. Remove tools and install the upper suspension arm. Refer to ARM, UPPER CONTROL, REMOVAL