
Battery Tray Explanation

Fig 1

Fig 2

Fig 3
Fig 4
BATTERY TRAY REMOVAL
WARNING: The battery negative and positive cable polarity are different from the gasoline engine equipped vehicles to the diesel engine equipped vehicles. Please note the location of the positive and negative cables prior to service of the battery or related components.
1. Disconnect and isolate the battery negative cable.
2. Disconnect the fresh air tube (Fig 1) #2 from the air cleaner assembly #1.
3. Remove the air cleaner assembly (Fig 1) #1 from the battery tray by pulling up on the air cleaner to disengage the mounting pins.
4. Remove the battery. Refer to BATTERY, REMOVAL
5. Remove the Totally Integrated Power Module. Refer to MODULE, TOTALLY INTEGRATED POWER (TIPM), REMOVAL
6. Remove the passenger side wheel lining (Fig 2) #2 retainer #1.
7. Remove the battery tray (Fig 2) #4 retainer #3.
8. Remove the four bolts (Fig 3) #2 and #5 and one nut #3 securing the battery tray #4 to the vehicle.
9. Lift the battery tray out of the engine compartment and remove from the vehicle.
BATTERY TRAY INSTALLATION
WARNING: The battery negative and positive cable polarity are different from the gasoline engine equipped vehicles to the diesel engine equipped vehicles. Please note the location of the positive and negative cables prior to service of the battery or related components.
1. Position the battery tray (4) into the engine compartment.
2. Loosely install the one nut (3) and four bolts (2 and 5) securing the battery tray (4) to the vehicle.
3. Tighten the nut to 10.5 N.m (93 in. lbs.).
4. Tighten the bolts to 10.5 N.m (93 in. lbs.).
5. Install the passenger side wheel lining (2) retainer (1).
6. Install the Totally Integrated Power Module (TIPM). Refer to MODULE, TOTALLY INTEGRATED POWER (TIPM), INSTALLATION
7. Install the battery. Refer to BATTERY, INSTALLATION
8. Install the air cleaner assembly (1) to the battery tray by pushing down on the air cleaner to fully engage the mounting pins.
9. Connect the fresh air tube (2) to the air cleaner assembly (1).
10. Connect the battery negative cable.