Disc Brake Caliper Adapter (Rear) Explanation

REAR DISC BRAKE CALIPER ADAPTER REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the caliper. Refer to CALIPER, DISC BRAKE, REMOVAL
4. Remove the disc brake caliper from the adapter.
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.
5. Remove the inboard (Fig 1) #3 and outboard brake pads #4. Refer to PADS AND/OR SHOES, BRAKE, REMOVAL
6. Remove the caliper adapter mounting bolts Fig 1) #2.

REAR DISC BRAKE CALIPER ADAPTER INSTALLATION
1. Install the caliper adapter mounting bolts (Fig 1) #2 and tighten to 105 N.m (77 ft.lbs).
2. Install the inboard (Fig 1) #3 and outboard pads #4. Refer to PADS AND/OR SHOES, BRAKE, INSTALLATION
3. Install the caliper. Refer to CALIPER, DISC BRAKE, INSTALLATION.
4. Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE