Door Latch Striker (Front) Explanation

FRONT DOOR LATCH STRIKER ADJUSTMENTS
1. Using a grease pencil or equivalent, mark the location of the door latch striker (Fig 1) #2 on the
B-pillar to aid in adjustment.
2. Loosen the two screws (Fig 1) #3 that secure the door latch striker to the B-pillar.
3. To adjust the rear gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 26 N.m (19 ft. lbs.). Refer to GAP AND FLUSH, SPECIFICATIONS
4. Verify correct door and latch position.

FRONT DOOR LATCH STRIKER REMOVAL
1. Remove the screws (Fig 1) #3.
2. Remove the striker (Fig 1) #2 and the shims #1, if equipped.

FRONT DOOR LATCH STRIKER ADJUSTMENTS INSTALLATION
1. Install the shims (Fig 1) #1, if equipped, and install the striker #2.
2. Install the screws (Fig 1) #3 and tighten to 26 N.m (19 ft. lbs.).
3. If necessary, adjust the door latch striker. Refer to ADJUSTMENTS