Stablizer (Sway) Bar End Link, Rear Explanation

REAR STABILIZER (SWAY) BAR END LINK REMOVAL
1. Raise and support the vehicle.
2. Remove the rear tire.
3. Support the rear axle with a jack.
4. Remove the upper link nut (Fig 1) #1 at the stabilizer bar.
5. Remove the lower link nut AND bolt (Fig 1) #3 at the axle.
6. Remove stabilizer link (Fig 1) #4.

REAR STABILIZER (SWAY) BAR END LINK INSTALLATION
NOTE: The stabilizer bar link to axle bracket fastener must be tightened with full vehicle weight.
1. Install the stabilizer link (Fig 1) #4 to the vehicle.
2. Install the upper nut (Fig 1) #1 for the stabilizer link to the stabilizer bar and tighten to 90 N.m (66 ft. lbs.).
3. Install the nut AND bolt (Fig 1) #3 to the axle and tighten to 102 N.m (75 ft. lbs.).
4. Remove the jack and lower the vehicle